Product has attributes to select
Asphalt-rubber hydro-insulation – gluing compound, Dn.
$ 31.01 /package
This product is not sold individually. You must select at least 1 quantity for this product.
Warning: Last items in stock!
|Application temperature||From +5°C|
|Layer thickness||1.5 - 5 mm|
IZOPLAST W-KL asphalt-rubber hydro-insulation – gluing compound is intended for making hydro-insulation coatings and gluing hard foamed polyester panels or mineral wool, making seamless anti-humid coatings of the light type, priming the base. It is used cold.
Before use, stir the product thoroughly.
- EPS polyester foam
- XPS polyester foam
The base should be clean, dry and smooth, cleaned of any fat/grease, hardened drips, etc. The concrete base should be previously primed with IZOPLAST DYSPERBENT preparation, or, if needed, a correct, hydro-insulation layer should be made in accordance with the design (we offer IZOPLAST products for this) or covered with tar paper. The thoroughly stirred IZOPLAST W-KL compound is applied on the surfaces being insulated with brush, roofing broom, or float.