Take a virtual walk around our shop


KONEKT Chimney systems introduction                

The chimney Konekt is a versatile and at the same time the best type of chimney system on the market.

It is designed to modern furnaces for solid fuels and liquid in which there is condensation effect of the exhaust gases (if the temperature is less than 200°C), as well as conventional heating devices. Triple, fully insulated with wool system solution makes the system meets the high requirements of modern heating techniques. Liners with high class A1N1 / B2N1 are resistant to soot fire and to high and low temperatures from 40 to 600°C. Cartridges are also characterized by a smooth surface and resistance to corrosive. The system is resistant to moisture and acidic condensate. Applied System Konekt specially profiled lagging filling the space between the pipe and hollow, ceramic keramzytobetonowym makes the system is simple and quick to install. Chimneys KONEKT has all the necessary certificates laid down in EN 13063-1, EN 13063-2 and EN 13063-3


The chimney KONEKT a three-layer, universal and at the same time the best type of chimney system on the market. It is designed to modern furnaces for solid fuels, liquid - also those in which there is condensation effect of the exhaust gases (exhaust gas temperature is lower than 200°C), as well as conventional heating devices. Triple, fully insulated with wool system solution makes the system meets the high requirements of modern heating techniques. Liners with high class A1N1 / B2N1 are resistant to soot fire and to high and low temperatures from 60 to 600°C. Cartridges are also characterized by a smooth surface and resistance to corrosive. The system is resistant to moisture and acidic condensate. Applied System KONEKT specially profiled lagging tower KONROC filling the space between the pipe and hollow, ceramic keramzytobetonowym makes the system is simple and quick to install.

The security layer KONROC has several very important functions in the chimney:

  • stabilizes ceramics
  • prevents cooling down the chimney, rapid firing up the stove on a cold chimney can seriously damage the ceramic elements
  • reduces the effect of condensation in the chimney flue - chimney flue in the cold cool down and reach the dew point turning into water
  • the ignition of the chimney is a fire-resistant barrier.

KONEKT Chimney System properties:

  • operating temperature range of from 60 to 600°C
  • resistant to soot fire
  • resistant to moisture, condensation and corrosion resistant construction
  • the possibility of foundation on the outside of the building
  • the opportunity to work with all types of fuels
  • lightweight design
  • perfectly suppresses sounds emanating from the boiler.

The system meets the requirements of the following standards: EN 13063-1, 13063-2 and 13063-3, which is confirmed by the received CE certificates.



Boards for floors, walls and roofs                

Among Kronobuild® building products of KronospAn belong various types of particle boards, osb boards, wood fibreboards and cement- bonded particleboards. these are large panel con- struction materials for floors, walls and roofs. they are manu- factured and tested according to the valid european standards. each type has its own characteristics for their intended final use.

Basic features of all these products meet requirements of the har- monized standards hen 13986, part ZA and other valid regulations for distribution and sale of boards within the european economic Area,whichisverifiedbyissuedcertificateswithvalid label. Validity of all certificates and protocols are continuously monito- red and updated as necessary. there are other certificates for countries outside the european union issued under valid regu- lations of each country.

EN 13986 standard „Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking“ regula- tes all legal construction interests in respect of the Construction products directive (Cpd). it applies to wood-based boards used as structural and non-structural components in dry, wet and out- door environment.

BOARDS FOR FINAL APPLICATIONS

Kronobuild® building products also includes the compact boards as material for final wall and ceiling cladding and lining. simi- larly, as noted above, compact boards meet the requirements of the harmonized standards en 438-7, part ZA and possess relevant certificates.

FORMWORK BOARDS

Formwork boards are special group of Kronobuild® products that are designed especially for the exposed concrete.

BASIC TECHNICAL DEFINITIONS

Kronobuild® construction products are divided according to their destined use in order to easier design of wood construc- tions regarding the basic european standard en 1995-1-1 or some national standards.

Technical definitions and basic terms related to board classifica- tion according to en 13986 is as follows:

• Dry condition

Conditions corresponding with service class 1 according to en 1995-1-1 are characterized by a moisture content in structural materials, which corresponds to the temperature of 20 °C and relative humidity of the ambient air of 65% few weeks a year at the most. most coniferous wood has the average moisture content not exceeding 12%.

• Humid condition

Conditions corresponding with service class 2 according to en 1995-1-1 are characterized by a moisture content in structural ma- terials, which corresponds to the temperature of 20 °C and relative humidity of the ambient air exceeding 85% few weeks a year at the most. most coniferous wood has the average moisture content not exceeding 20%.

External condition

Conditions corresponding with service class 3 according to en 1995-1-1 is characterized by climatic conditions leading to higher moisture content than the second service class.

Load-bearing (structural) use

Using the board under load as part of the building or other con- struction.

Structural floor decking

Floor set of wood-based boards placed on joists and over- lapping its span. the boards under load freely deflect between the joists.

Structural wall sheathing

Wood-based boards capable of providing mechanical strength for the wall construction.

Structural roof decking

A set of wood-based boards placed on the rafters and over- lapping their span. the boards under load deflect freely be- tween the rafters. 



Technical support

Safety and trust are the most important values in the operations of our online store. However, there is still one thing which is equally important and significant, i.e. exceptional customer service based on professional support.

Thanks to a well thought-out personnel policy, we have ensured that our staff possess a very high level of education. The group of engineers in our support and commercial team have extensive experience in working on construction sites. We are, therefore, perfect partners in the implementation of every investment, for example civil engineering projects, single-family houses or simple repairs. Owing to our extensive knowledge of the market of construction materials, consultations with designers and contract engineers, we offer our customers the most optimal solutions.

We will happily share our theoretical and practical experience with you, according to your expectations during each stage of investment implementation – from planning to execution.

Our priority will always be to provide our customers with professional help through efficient support to ensure CUSTOMER SATISFACTION!

For this reason, we encourage you not only to make purchases in our store, but also ask a series of questions about technical issues and prices.

We are available for you around the clock – contact@realbud.com or +48 530 710 580.