Product has attributes to select

Price from: 

Back to the product list
Go to product page
Take a virtual walk around our shop
Izoplast SEPARBETON mould grease, 20L View larger

Izoplast SEPARBETON mould grease, 20L

Anti-adhesion preparation – GREASE FOR MOULDS

More details


$   40.24 /unit

$ 32.72 tax excl.

Capacity20L
Usageapprox. 1 kg for 35-60 m² of formwork
Weight20 kg
SupplierR-S SYSTEM
Volume0.03 m³

Properties:

The IZOPLAST SEPARBETON is an oily liquid of low viscosity and is a mixture of both mineral and vegetable oils, and modifying additives. The product does not contain any components classified as dangerous, and as a whole is not classified as dangerous either.

Application:

The IZOPLAST SEPARBETON is intended for the lubrication of production moulds (made of steel, wood, and plastic) in plants manufacturing structure elements of aggregate and cellular concrete, and also layered elements with the use of polystyrene foam to prevent concrete sticking.

How to use:

The product can be applied on the mould surface with a spray-gun, brush, by immersing, or with a piece of cloth. Stir well before use.

The formwork surfaces have to be clean and dry. Remove rust and any remains of old concrete. The preparation is ready to use and it should not be thinned down. Spray with a thin but well covering layer by means of high-pressure (4 – 6 bar) spraying tool. Concreting can be carried out after waiting 30 – 60 minutes from the time of the application of the preparation.

Work in a temperature from 0 up to 80°C.

Consumption: about 1 kg per 35 – 60 m2 of framework surface, depending on the base absorption capacity.

Write a review

Izoplast SEPARBETON mould grease, 20L

Izoplast SEPARBETON mould grease, 20L

Anti-adhesion preparation – GREASE FOR MOULDS

Write a review