Product has attributes to select
They perform the function of permanent shuttering. They enable making wreaths, beams, reinforced concrete pillars and lintel openings with a width of more than 250 cm.
Goods on non-returnable pallets
The price is for U17,5/20
Below, select the appropriate width:
$ 4.04 /unit
|Height||199 mm or 249 mm|
|Supplier's index||240 030 740|
Ytong U-elements are placed on a pre-prepared mounting support. This function is performed by the board flush with the upper surface of the block layer. In the case of openings with a larger span, the board should be supported eg with stamps, so that the poured lintel does not bend.
On the prepared bridge, Ytong U-elements are jointed, filling vertical joints with Ytong-Silka mortar for thin joints. The interior of the prepared formwork should be cleaned and moistened with water prior to concreting.
If the lintel from Ytong U-elements is used in the outer wall, a thermal insulation layer should be placed inside the fittings. Keep in mind that it is closer to the outside.
Then, the reinforcement is placed in the formwork and the whole is covered with a concrete mix.