Product has attributes to select
|Usage||ca. 1.5 kg/m²/1 mm|
|Application temperature||from +5°C to +25°C|
|Number of layers||min. 2|
|Quantity per Pallet||33 pcs.|
A two-component, high-pressure, flexible, resistant to aggressive chemicals (acids, chlorides, sulfates contained in atmospheric and ground precipitation) mineral waterproofing mortar for making elastic sealing of substrates inside and outside of vertical and horizontal waterproofing buildings, in particular bath-type insulation, ceilings underground garages, tunnels, underground passages, swimming pools, drinking water tanks and waste water, insulation of terraces, balconies, pedestals, foundations, stairs, sealing of concrete roofs.
Extremely water resistant - also in constant contact with it, excellent long-term resistance to weather conditions, good scratch resistance, good load capacity and high water vapor permeability. The resulting coating is rough, adapted to the application of ceramic cladding. It is easy to apply, it can be applied to surfaces with complex shapes. It is available in gray.
In order to obtain the consistency of the putty, pour the dispersion into the container and add the powder component while mixing. Mix until a homogeneous mass is obtained (approx. 3-4 min), then after approx. 5 min. mix the mortar again.
Inside the bucket there is a smaller container with the mixing ingredient.