WEBER TD331 silicate plaster, 1.5 mm lamb, 30 kg
Wróć do kategorii: Thermal insulation systemFiles to download
Possible delivery options
Any questions?
Description
Technical data
Supplier: | WEBER |
Supplier's index: | 14WTD331/30B15 |
Quantity per Pallet: | 24 pcs. |
Application temperature: | +8 to +25°C |
Properties: | 1,95 g/cm3 +10% |
Weight: | 30 kg |
Weber TD331 silicate plaster mass is a factory-colored product, delivered in buckets, in the form of a paste, ready for use at the construction site after prior mixing. The product is based on a binder based on potassium water glass and mineral structural aggregates. The plaster has a protective coating against algae and fungi fouling.
The most important product properties
- high adhesion to the substrate
- antistatic, resistant to dirt
- vapor-permeable
- resistant to algae and fungus growth
- ready to use, available in 202 colors
Application of the product
Protection and color finishing of thermal insulation and renovation systems:
- especially exposed to biological aggression
- whose colors are based on light, pastel colors
The plaster can be used in Weber insulation systems based on the following insulation materials: p >
- polystyrene
- extruded polystyrene
- mineral wool
Note!
It is not recommended to use the plaster compound:
- on surfaces not protected against precipitation, horizontal or inclined to the level
- during p periods high humidity and low air temperatures
Recommendations
- Plaster should not be used in areas exposed to constant moisture, e.g. plinths.
- Plaster should not be used in conditions of low temperatures and high air humidity
- Plaster should not be used on horizontal surfaces or those inclined to the horizontal
- Plaster should not be rubbed with a wet tool
Bulk density | 1 , 95 & amp; plusmn10% g / cm? |
Application temperature: | +8 to + 25 & amp; degC | Open time: | about 30 minutes |
Translations of product names and their descriptions have been translated using Google Translate.