Weber.tec 944 1 kg - polyurethane resin for injection of water-conducting cracks
Wróć do kategorii: Resin-based water insulationFiles to download
Possible delivery options
Any questions?
Description
Technical data
Supplier: | WEBER |
Supplier's index: | 14TEC944/01 |
Color: | Gray Yellow |
Package: | Bucket |
Usage: | Na litr spoin lub pustek ok. 200 g |
Weight: | 1 kg |
Product Application
Suitable for: filling voids and sealing cracks (cracks) in concrete and masonry, water reservoirs, swimming pools, wastewater treatment plants, wharfs, foundations and wells as well as sealing pipes with muff connection.
The product is used especially for sealing in wet and humid environments. Contact of this preparation with moisture causes it to swell and harden. Depending on the temperature and humidity, weber.tec 944 can expand 10 times its volume. Weber.tec 944 cannot be used for forceful connections (seals). To obtain this type of seal, other formulations based on epoxy resins should be used.
The most important properties of the product
- 1-component polyurethane resin, hardening under the influence of moisture,
- can expand 10 times its volume,
- resistant to sea water, salt, gasoline, oils and fats as well as many lyes, acids and other chemicals. < / li>
Safety precautions
Read the Material Safety Data Sheet and labeling. Use personal protective equipment (protective clothing, gloves, glasses or a face mask).
During the work, the health and safety regulations regarding health protection resulting from the relevant ordinances and the provisions of the safety data sheets should be observed hazardous substances and labeling on packaging.
Translations of product names and their descriptions have been translated using Google Translate.