Murfor RND / Z / 30-4 reinforcement for traditional mortars

Prefabricated reinforcing beams, consisting of two parallel rods connected by means of a third, curved sinusoidal.


Technical parameters of steel used for reinforcement production:

• min. breaking strength 550 N / mm2
• yield point min. 500 N / mm2
• shear weld strength of min. 2500 N
• Murfor® increases the compressive strength of the masonry especially in the case of boundary loads.

Murfor® increases the rigidity of buildings by tethering load-bearing walls with partition walls.
Murfor® offers new architectural possibilities, e.g.
- walls (elevations, fences) without bindings

- double walls

- elimination of traditional lintels

- elimination of traditional wreaths

- increasing the distance between dilatation (or eliminating them)

 

The application of Murfor® in the masonry gives extraordinary effects in preventing scratches and cracking.
The main reasons for wall scratches are:

• mining damage
• exceeding the load capacity of the wall for bending; shear
• cramps, creep and expansion of the structure
• uneven settlement
• earthquakes, vibrations, explosions