Produkten har attribut att välja
The KONEKT TURBO chimney is a modern, two-layer air-combustion system designed for exhausting gases from furnaces with a closed combustion chamber, Turbo as well as condensing furnaces with a closed combustion chamber.
All free delivery promotions are valid only within the area of Poland.
3 748.37 kr /set
The KONEKT TURBO Chimney System is a modern, two-layer air-flue gas system designed for flue gas discharge from closed chamber furnaces and condensation furnaces. The system uses high-quality chimney ceramics that meet the requirements of D3P1, while the whole system meets the harmonized requirements set out in the standards EN 13063-2 and 13063-3, confirmed by received European certificates.
The combustion air in this system is supplied through channels between the ceramic pipe and the chimney casing. It flows in a reverse stream to the flue gas. In this way, it was possible to solve the problems associated with the air necessary for combustion in new buildings, where it is not possible to supply air to the furnace from outside.
The TURBO Chimney System is a chimney to which heating devices located on individual floors of the building can be connected, the system allows you to connect up to 12 heating devices to one chimney.
The number of permissible connections depends on the boiler power and chimney cross-section. The number of permissible connections depending on the cross-section of the chimney is presented in the table below:
PERMISSIBLE (DEPENDENT ON CROSS SECTION) NUMBER OF DEVICES CONNECTED TO ONE TURBO CHIMNEY SYSTEM)
|Chimney diameter||The number of devices allowed|
Characteristics of the KONEKT TURBO chimney system
The system meets the requirements of the following standards: 13063-2 and 13063-3, which is confirmed by the received CE certificates.