Produkten har attribut att välja

Pris från: 

Tillbaka till produktlistor
Gå till produktsidan
Gå runt i vår butik virtuellt

Hot air welding roofing felt PYEPV200S40 Type T SILNY WERNER 7.5 m²

Numer produktu Realbud: 56358

The undercoat layer in multi-layered water-protection systems.

Mer detaljer

211.26   kr 171.756523 /rulle

171.76 kr exkl. moms.

Förpackning 7.5 m²
Längd 7.5 m
Bredd 1 m
Tjocklek 0.4 mm
Vikt 35 kg
Hållfasthetsklass Tensile - 800/500 N/50 mm (longitudinal, transverse)
Brandklass Class E
Kvantitet på en lastpall 24 pcs.
Supplier's index PYEPV200S40 SILNY P
Tillverkare WERNER
Volym 0.04 m³

The bitumen undercoat torch-on membrane, SBS-modified on the composite polyester-fibre glass needled cloth base. The top side covered with fine-grained mineral topping, along one edge of the membrane strip there is a zone of bitumen compound not covered with the topping, and protected with plastic film. The underside of the torch-on membrane is protected with plastic film.

Purpose and scope of application:

The undercoat layer in multilayered water-protection systems and damp-proof insulation in the structures of walls or on/under floors or slabs placed in the ground in order to protect from water under hydrostatic pressure penetrating from the ground to the inside or from one part of the structure to another.

It is not designed for roof coverings with plant cultivation. If the product is used on buildings for which fire class resistance requirements are applicable, the part of the building where the product has been applied must meet those requirements and the requirement of the extent of fire spread

Fastening method:

This membrane is fastened to the base with the use of mechanical connectors and by welding it on both transverse and longitudinal overlaps, or over the entire underside surface, depending on the used base.

Information corcerning the application conditions, storage and transportation:

This membrane must not by laid at an ambient temperature of less than +5°C, on wet and/or iced surfaces, during rainfall or snowfall and in times of strong winds. The rolls of the bitumen membrane shall be stored on an even base in an upright position, one layer, protected from overturning, damage, or ambient conditions. Rolls shall be transported in an upright position protected from overturning and damage.

Skriv din recension

Hot air welding roofing felt PYEPV200S40 Type T SILNY WERNER 7.5 m²

Hot air welding roofing felt PYEPV200S40 Type T SILNY WERNER 7.5 m²

The undercoat layer in multi-layered water-protection systems.

Skriv din recension