Produkten har attribut att välja
Weber.tec Superflex 10 is a flexible, two-component sealant (KMB), designed for permanent and reliable waterproofing of buildings. Trowel grade.
All free delivery promotions are valid only within the area of Poland.
742.32 kr /st
|Förbrukning||3,5 - 4,5 L/m²|
|Ytterligare information||Recommended application of 2 layers|
|Appliceringstemperatur||+1°C to +35°C|
|Kvantitet på en lastpall||18 st|
Weber.tec Superflex 10 is a solvent-free and highly flexible 2-component waterproofing compound. With general approval and CE-marking according to EN 15 814.
Weber.tec Superflex 10 is convenient for the external waterproofing of masonry and concrete below ground level for:
concrete floor slabs
ceiling slabs of car parking decks.
application to any mineral substrates such as lime sandstone, bricks, concrete blocks, concrete, cellular concrete, render and floor screed in case of soil moisture as well as non-pressure and pressure water
for the intermediate waterproofing of wet-duty rooms, balconies and terraces under floor screed
for spot and full-surface bonding of extruded polystyrene rigid-foam boards, expanded polystyrene boards and mineral
fibreboards used as protective, drainage or authorized perimeter insulation boards.
flexible and crack-bridging
dry residue of approx. 80% by volume
suitable for any mineral substrates; no cement render is necessary on masonry
resistant to ageing, water and any aggressive substances occurring in natural soil
resistant to sulphate-containing water (up to 3.000 mg sulphate per litre of water according to DIN 4030) and also resistant to seawater.