Produkten har attribut att välja

Pris från: 

Tillbaka till produktlistor
Gå till produktsidan
Gå runt i vår butik virtuellt

Ytong PP4/0,6 S+G from 115 to 365 mm

Numer produktu Realbud: 49436

GOODS SOLD ONLY BY FULL PALLETS!

365 mm - 32 pcs./pallet

300 mm - 40 pcs./pallet

240 mm - 48 pcs./pallet

200 mm - 56 pcs./pallet

175 mm - 64 pcs./pallet

150 mm - 80 pcs./pallet

115 mm -104 pcs./pallet

Goods on non-returnable pallets

Tag price refers to the width of 115 mm

Below select your desired thickness:

Mer detaljer


13.40   kr /st

10.90 kr exkl. moms.

Längd 599 mm
Höjd 199 mm
Förbrukning 8.33 pcs./m²
Vikt 10.82 kg
Material Gas-concrete
Värmeledningsförmåga 0.11 W/(mK)
Färg White
Supplier's index 201230410
Tillverkare XELLA
Volym 0.01 m³

Ytong blocks are intended, among others, for erecting single-layer walls. The dimensional accuracy of Ytong blocks (± 1 mm) allows for a perfect matching of the elements to each other. The tongue and groove system eliminates the need for vertical joints. Blocks can be bricked using thin joint mortar, only adding a horizontal joint. Mineral plaster is used on the brick walls, its low thickness (external 15 mm, internal thickness 5 mm) thanks to the smooth face of the wall reduces its wear and speeds up finishing works.

The following blocks are available in the Ytong system:

  • Ytong blocks profiled with tongue and groove with mounting bracket S + GT - are designed for erecting structural walls with thin welds. Due to the face and groove profiled with the tongue and groove, the vertical joint is not filled with mortar. In addition, handles are milled in the front faces to facilitate the transfer and positioning of the blocks.
  • Ytong blocks profiled with tongue and groove S - blocks with a thickness ≤ 200 mm, which due to their low mass do not have mounting brackets and are only equipped with profiling of the side surface for tongue and groove. The vertical joint is not filled with mortar.
  • Smooth Ytong blocks with GT mounting bracket - they are used for erecting basement and foundation walls with filled vertical joints. In addition, handles are milled in the front faces to facilitate the transfer and positioning of the blocks.
  • Ytong supplementary blocks - designed to top up walls with a height not being a multiple of 20 cm.
2017-01-27

Tadeusz

Bardzo dobre, polecam.
Ja ten produkt zamówiłem razem z ytong krztałtka i ytong energ. Dostawa szybka a i cena niska, jestem zadowolony z zakupu w realbud.com

Skriv din recension !

Skriv din recension

Skriv din recension

TA YTONG PL

Technical approval

Tillbehör